Need an advice for reaching dragon force songs...

[FURR]

Finally our arcade is foam modded... i guess i could try to step lightly

Nice! The foam mod will definitely help.

I Hope So ))

[FURR]

Foam mod's awful ...

whole platform isn't working, except the left part, but the UP arrow works too a lot of i get like 20+ with decents and way-offs.
May be the screws were screwed too tight? I guess they were tightened with a screwing-gun or something...

[Gazebo]

It sounds like there is too much foam. Try making the foam mod thinner.

[FURR]

It sounds like there is too much foam. Try making the foam mod thinner.

Not really... they're not that lifted with that foam ~2mm of it on the each corner and on the each side, where are the sensors i guess. but that wasn't me modding it, the owner did.

[FURR]

i don't know what he had done to the right platform. Before the foam mod it was working perfect now the right arrow works only on it, other 3 are FULL Dead.
Eh... Sounds like there' nothing how to fix this, except to take off the foam

[Gazebo]

i don't know what he had done to the right platform. Before the foam mod it was working perfect now the right arrow works only on it, other 3 are FULL Dead.
Eh... Sounds like there' nothing how to fix this, except to take off the foam

My guess is that the foam is too thick, therefore the panel is always putting too much pressure on the sensor, leaving it stuck in the "on" position. Are mines triggering automatically even when you're not touching the pad?

[FURR]

i don't know what he had done to the right platform. Before the foam mod it was working perfect now the right arrow works only on it, other 3 are FULL Dead.
Eh... Sounds like there' nothing how to fix this, except to take off the foam

My guess is that the foam is too thick, therefore the panel is always putting too much pressure on the sensor, leaving it stuck in the "on" position. Are mines triggering automatically even when you're not touching the pad?

mines aren't detonating while the song plays> they're just like dead- no reaction at all on the right platform.
but the left panel seems to be okay but the (up) arrow reacts only on hard hits or the holds just being released. it worked when i used to step Full foot + hitting it

[SteveReen]

Sounds like there are either no sensors plugged in or the only ones plugged in are awfully undersensitive. A good foam mod should have one sensor plugged in on each arrow -- placed at the inside of the panel (as in closest to the center), and only moderately sensitive. The pressure of the foam should increase the sensitivity a lot so any more than that will cause firing or sticking.

[FURR]

Sounds like there are either no sensors plugged in or the only ones plugged in are awfully undersensitive. A good foam mod should have one sensor plugged in on each arrow -- placed at the inside of the panel (as in closest to the center), and only moderately sensitive. The pressure of the foam should increase the sensitivity a lot so any more than that will cause firing or sticking.

ya... you were right, the sensors were very undersensitive.
everything's okay with the foam i guess, but i'm not sure where it should be...
The foam was on the metall brackets only... should it be on the corners of the button plastic thing? Or the Foam should be right on the Arrow(on the other side of it)?

[FURR]

So, here's the video where i'm playing. I'd like to know if there's something wrong when i'm playing like : standing, leaning, hitting the arrows and so on ... Hope someone will find something that i need to change to get better .